2025 SANY® Wheel Loaders SW405K
- Year 2025
- Make SANY®
- Model Wheel Loaders
- Engine TCD6.1
2025 SANY® Wheel Loaders SW405K
2025 SANY® Wheel Loaders SW405K
The SW405K features a reinforced structural design that’s built to take on the toughest work, including heavy-duty mining operations. It offers an impressive service life reaching 10,000 hours, and boasts a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The high-pressure, load sensing hydraulics provide a balance of speed and power. The Z-bar linkage design delivers 40,466 lbf of breakout force.
Features may include:
- The 228-net horsepower with almost 40,000 lbs of breakout force and bucket capacity of 4 cubic yards
- Tight turning radius coupled with fast cycle times with return to dig functionality means you’ll spend more time working and less time maneuvering.
- Keep more material in the bucket with the SANY boom suspension
- Time-tested components such as the Eaton load sensing steering valve, Dana axles and brakes
Engine
Engine Manufacturer
Deutz
Engine
TCD6.1
Engine Power
Gross: 262 HP | Net: 228 HP
Engine Torque, Maximum
Gross: 965 lbs ft
Displacement
476 in3
Drivetrain
Transmission
Shift modes: Automatic, Manual, Kick-Down | Forward Gear 1-4: 4–25 mph | Reverse Gear 1-4: 4–16 mph
Brakes
Brake System Type
Service Brakes: Wet disc | Parking Brake: Disk Brake
Operational
Operating Conditions
Breakout Force: 40,466 lbf | Tipping Load Straight: 31,967 lbs | Tipping Load @ Full Term: 28,881 lbs | Reach at Max. Lift and 45º Discharge: (3' 11")
Cycle Time
Raise: 5.4 sec | Dump: 1.9 sec | Float Down: 3.3 sec | Total Cycle Time: 10.6 sec
Hydraulics
Hydraulic Flow
Max: 81 GP
Maximum Pressure
Max: 4,061 PSI
Dimensions
Ground Clearance
Full lift 45º dump: 10' 2" | 430 mm (1' 5")
Height
To Top of Cab: 3,580 mm (11' 9") | Max Dump: 5,415 mm (17' 9") | Hinge Pin at Max. Lift: 4,145 mm (13' 7") | Roll Back at Carry: 50º
Dimensions
Center Line of Rear Axle to Edge of Counterweight: 2,335 mm (7' 8") | Center Line of Front Axle to Center Pivot: 1,600 mm (5' 3") | Dump Clearance at Max. Lift : 3,090 mm (10' 2") | Reach at Max. Lift and 45º Discharge: 1,185 mm (3' 11") | Roll Back at Max. Lift: 58º | Dump Angle at Max. Lift and Dump: 45º | Roll Back at Ground: 45º | Tail Angle to the Rear Wheel: 27º | Clearance Circle to Outside of Tires: 5,911 mm (19' 5") | Clearance Circle to Counterweight: 6,465 mm (21' 3") | Max. Circle: 5,969 mm (19' 7") | Articulation Angle: +/- 40º
Wheelbase
3,200 mm (10' 6")
Length
Shipping without Attachments: 7,040 mm (23' 1") | Shipping with Bucket: 8,180 mm (26' 10")
Depth, Maximum
Dig Level Bucket: 30 mm (1.2")
Width
2,200 mm (7' 3")
Capacities
Fuel Capacity
Tank: 79.3 gal
Cooling System
11.4 gal
Tank Type
Crankcase: 6.1 gal | DEF tank: 5.3 gal
Axle Capacity, Front
7.4 gal
Axle Capacity, Rear
7.4 gal
Hydraulic Capacity
Tank: 76.6 gal
Features
Bucket: 4.0 yd3 | Transmission: 9.2 gal
Weights
Weight
Operating: 40,786 lbs
Features
Features
Front Axle: Fixed | Traction Aid: Manual Differential Lock | Rear Axle: Oscillating | Traction Aid: Open Differential