2025 SANY® Wheel Loaders SW305K

Current SANY® Construction-Equipment Wheel Loaders

Swipe to View More

Year 2025
Make SANY®
Model Wheel Loaders
Engine TCD6.1

Year 2025
Manufacturer SANY®
Model Name Wheel Loaders
Trim Name SW305K
Generic Type (Primary) Compact
Engine Manufacturer Deutz
Engine TCD6.1
Engine Power Gross: 181 HP | Net: 163 HP
Engine Torque, Maximum Gross: 649 lbs ft
Displacement 372 in3

The SANY SW305K wheel loader is the constant workhorse in your fleet. Beyond outstanding durability and reliability, this machine focuses on increased operator comfort for long production days. Your operators will enjoy unobstructed views to the bucket, a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The SW305K’s Z-bar linkage design delivers 27,652 lbf of breakout force. You can rely on this wheel loader’s time-tested components like the Deutz engine, ZF transmission and Kawasaki pumps–offering you an impressive service life over the long haul.

Features may include:

Engine: Deutz TCD6.1

Boom suspension system

Differential locking axle

Automatic transmission kick down

Bucket self-leveling and return to dig

Single joystick control

Third function hydraulics

360-degree camera

Engine

Engine Manufacturer Deutz

Engine TCD6.1

Engine Power Gross: 181 HP | Net: 163 HP

Engine Torque, Maximum Gross: 649 lbs ft

Displacement 372 in3

Drivetrain

Transmission Shift modes: Automatic, Manual, Kick-Down | Forward Gear 1-4: 4–25 mph | Reverse Gear 1-4: 4–17 mph

Brakes

Brake System Type Service Brakes: Wet disc | Parking Brake: Disk Brake

Operational

Operating Conditions Breakout Force: 27,652 lbf | Tipping Load Straight: 19,619 lbs | Tipping Load @ Full Term: 17,006 lbs | Reach at Max. Lift and 45º Discharge: 1038 mm (3' 5")

Cycle Time Raise: 5.6 sec | Dump: 1.6 sec | Float Down: 3.2 sec | Total Cycle Time: 10.4 sec

Hydraulics

Hydraulic Flow Max: 58 GPM

Maximum Pressure Max: 3,916 PSI

Dimensions

Ground Clearance Full lift 45º dump: 8' 10" | 407 mm (1' 4")

Height To Top of Cab: 3,405 mm (11' 2") | Max Dump: 5,226 mm (17' 2") | Hinge Pin at Max. Lift: 3,845 mm (12' 7") | Roll Back at Carry: 49º

Dimensions Center Line of Rear Axle to Edge of Counterweight: 1,911 mm (6' 3") | Center Line of Front Axle to Center Pivot: 1,480 mm (4' 10") | Dump Clearance at Max. Lift : 2,689 mm (8' 10") | Reach at Max. Lift and 45º Discharge: 1038 mm (3' 5") | Roll Back at Max. Lift: 61º | Dump Angle at Max. Lift and Dump: 45º | Roll Back at Ground: 42º | Tail Angle to the Rear Wheel: 28º | Clearance Circle to Outside of Tires: 5,382 mm (17' 8") | Clearance Circle to Counterweight: 5,365 mm (17' 7") | Max. Circle: 5,969 mm (19' 7") | Articulation Angle: +/- 40º

Wheelbase 3,000 mm (9' 10")

Length Shipping without Attachments: 6,226 mm (20' 5") | Shipping with Bucket: 7,518 mm (24' 8")

Depth, Maximum Dig Level Bucket: 122 mm (4.8")

Width 2,045mm (6' 9")

Capacities

Fuel Capacity Tank: 60 gal

Cooling System 8.7 gal

Tank Type Crankcase: 4.1 gal | DEF tank: 2.6 gal

Axle Capacity, Front 9.2 gal

Axle Capacity, Rear 9.2 gal

Hydraulic Capacity Tank: 34 gal

Features Bucket: 3.2 yd3 | Transmission: 14.5 gal

Weights

Weight Operating: 31,967 lbs

Features

Features Front Axle: Fixed | Traction Aid: Manual Differential Lock | Rear Axle: Oscillating | Traction Aid: Open Differential

2025 SANY® Wheel Loaders SW305K